Hi guys, Welcome to the Advanced Video Search Engine, and you are watching #MakeEveryDay 36- How To Make 3D Printed Threads LIKE A BOSS!. That video is uploaded by Repkord at 2017-07-18T02:52:30-07:00. We are promoting this video only for entertainment and educational purpose only. So, I hope you like & enjoy it. [5loC9s2dNGU]
| Name | #MakeEveryDay 36- How To Make 3D Printed Threads LIKE A BOSS! |
| Video Uploader | Video From Repkord |
| Upload Date | This Video Uploaded At 18-07-2017 09:52:30 |
| Video Discription | #MakeEveryDay Vids are my short form #makerlog highlights of various projects I work on throughout the week. I'll do my best to provide as much details in the descriptions below but these vids are designed to be quick digestible bits that take less than 60s to watch and focuses on the project itself and not me talking about it. I will do my best to post longer form more detailed content where I dive into more specifics on more of a weekly basis. _________________________________________________ While you can certainly model and print threads to some pretty tight tolerances I’ve found that if you don’t want to spend a lot of time perfecting your print settings and re-printing it’s better to get as close as you can and do just a little bit of post-processing. Doing so will generally ensure a part with good layer adhesion and a cleaner, tighter threading. Take a quick look to see what I mean. I'm using this model by @AKIRA737 on Thingiverse here: https://www.thingiverse.com/thing:1460364 5loC9s2dNGU |
| Category | Howto & Style |
| Tags | 3D printing | maker | diy | how to | fabrication | Repkord | MakeEveryDay | MakeOn! |
