Hi guys, Welcome to the Advanced Video Search Engine, and you are watching Which Layer Height Do You Print In? 3D Printing Resolutions Explained. That video is uploaded by Vision Miner at 2019-06-14T06:30:00-07:00. We are promoting this video only for entertainment and educational purpose only. So, I hope you like & enjoy it. [09ZMHPis-nE]
| Name | Which Layer Height Do You Print In? 3D Printing Resolutions Explained |
| Video Uploader | Video From Vision Miner |
| Upload Date | This Video Uploaded At 14-06-2019 13:30:00 |
| Video Discription | In today’s video, we cover tuning in your layer height, another crucial part of printing parts perfectly every time. Most 3D printers on the market utilize the standard 0.4 millimeter printing nozzle and use a default setting of 0.2 millimeter layer height. This combination follows a rule of thumb where your layer height is half the size of the nozzle you print with. Of course, you can always experiment with flatter, wider nozzles versus skinnier and more-pointed nozzles, but Vision Miner recommends following this ratio if you are just starting out. Moreover, you can go down from 0.2 millimeters to 0.1 or 0.05 on most machines. The trade-off with smaller nozzle diameters is between print resolution and printing time. For example, if you switch from a 0.2mm nozzle to a 0.1mm nozzle, you extrude half as much plastic and double your layer count, effectively doubling your print time, as well. However, you will end up with a part that comes out much more dimensionally accurate and aesthetically pleasing. The balance between nozzle diameter and layer height comes down to both personal preference and project requirements. If you need a part fast and it does not matter how that part looks, then you can go with higher layer heights and a larger nozzle with little concern. But, if you need a part to fit accurate specifications as well as look detailed, you may consider going with thinner layer heights, assuming you have the time required. With all this in mind, Vision Miner recommends sticking with a standard 0.4mm nozzle and 0.2mm layer height if you’re a beginner in 3D printing. If you’re interesting in learning more about tuning, check back on the blog for more updates and visit our YouTube channel for more videos! At Vision Miner, we specialize in Functional 3D printing, especially high-performance plastics like PEEK, ULTEM, PPSU, PPS, CFPA, and more. We also have extensive experience with 3D scanners, and a whole array of solutions available for purchase. If you're interested in using functional 3D printing and materials in your business, feel free to reach out, and we can help you make the right choice for your application. Call 833-774-6863 or email contact@visionminer.com, and we're here to help! Follow Us ►Facebook: https://www.facebook.com/visionminer/ ►Instagram: https://www.instagram.com/visionminer/ ►Twitter: https://twitter.com/visionminer ►TikTok: https://vm.tiktok.com/ZMehCAwxp/ 09ZMHPis-nE |
| Category | Science & Technology |
| Tags | 3d printing | 3d print | 3d printer | 3dprint | how to | 3d printed | what is 3d printing | what is a 3d printer | beginner 3d printer | high performace material | high-performance material | 3d printers | 3d printer tuning | how to 3d print | printing peek | best way to 3d print | tuning 3d printer settings | tuning your 3d printer | fine tuning 3d printer | 3d printer tuning guide | what is 3d printing video | beginner 3d printer 2019 |
